Modular DVI Matrix Switchers

Product Description

Key FeaturesAvailable in I/O sizes from 4x4 to 16x16 or 36x36, depending on the DMS Matrix Switcher Frame selectedModular and field-upgradeable designChoice of DMS DVI or Fiber Matrix I/O boardsSupports data rates to 4.95Gbps - 1.65Gbps per colorEDID Minderautomatically manages EDID communication between connected devicesEthernet monitoring and control Video DMS DVI boards Routing From 4 x 4 to 36 x 36 matrix, expandable by increments of 4 inputs and 4 outputs Gain Unity Resolution range Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 48, 50, or 60 Hz Signal Type Single-link DVI digital video signals are supported. Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI [if using an optional adapter] standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) NOTE The DMS DVI Series boards are not compatible with HDMI. Digital audio Embedded audio from HDMI sources can be passed, as long as it is not HDCP encrypted content Consumer Electronics Control (CEC) Not supported EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. HDCP Not supported HPD Supports hot plug detection (HPD) of display as a pass-through signal. Maximum data rate 4.95 Gbps (1.65 Gbps per color) Maximum pixel clock 165 MHz Standards DVI 1.0 Switching speed 200 ns, max. Video input DMS 44 DVIand DMS 4i DVI input boards Number/signal type 4 digital RGB single link DVI-D per input board Connectors 4 female DVI-I (digital only) per input board Equalization Automatic Input cable length 100 (30 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p; 8 bit color NOTE The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system. Video output DMS 44 DVI and DMS 4o DVI output boards Number/signal type 4 digital RGB single link DVI-D per output board Connectors 4 female DVI-I (digital only) per output board Re-clocking Automatic Output cable length 50 (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p Peripheral device power 250 mA per output Communications switcher host ports Serial host control port 1 bidirectional RS-232 or RS-422, rear panel 9-pin female D connector Baud rate and protocol 9600 (default), 19200, 38400, 115200 baud, adjustable; 8 data bits, 1 stop bit, no parity Serial control pin configurations 9-pin female D connector RS-232 2 = Tx, 3 = Rx, 5 = Gnd RS-422 2 = Tx-, 3 = Rx-, 5 = Gnd, 7 = Rx+, 8 = Tx+ USB control ports 1 front panel female mini USB B USB standards USB 2.0, low speed Ethernet control port 1 RJ-45 female Ethernet data rate (for network communication) 10/100Base-T, half/full duplex with autodetect Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet Ethernet default settings Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off Web server Up to 200 simultaneous sessions 7.0 MB nonvolatile user memory Program control Extron control/configuration program for Windows Extron Simple Instruction Set (SIS) MicrosoftInternet Explorerver. 6 or higher, Telnet General Power supply Internal, 2* (positive-negative) Input: 100-240 VAC, 50-60 Hz *A redundant power supply is standard. Power consumption 212 watts Measured fully loaded with (9) 4x4 I/O boards Power consumption: I/O boards Ambient temperature/humidity Storage: -40 to +158F (-40 to +70C) / 10% to 90%, noncondensing Operating: +32 to +122F (0 to +50C) / 10% to 90%, noncondensing Cooling Fan, right to left (as viewed from front panel) Thermal dissipation, full load 724 BTU/hr Measured fully loaded with (9) 4x4 I/O boards Rack mount Yes Enclosure type Metal Enclosure dimensions 14.0" H x 17.0" W x 12.25" D (8U high, full rack wide) (35.6cm H x 43.2 cm W x 31.1 cm D) (Depth excludes connectors and handles. Width excludes rack ears.) Product weight with boards installed 38.5 lbs (17.5 kg) Shipping weight with boards installed 48 lbs (22 kg) Regulatory compliance CE, c-UL UL,C-tick, FCC Class A, ICES, KC, VCCI, Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor