Four Input HDMI Switcher With Integrated DTP Transmitter

Product Description

Key FeaturesTransmits HDMI plus control up to 330feet (100meters) over a shielded CATx cableAuto-switching between inputsSupports computer and video resolutions up to 4KRemote powering of DTP receiverDTP output is compatible with HDBaseT-enabled devicesSupports multiple embedded audio formats specification Frame rate1 24, 25, 30, 50, or 60 fps Chroma sampling1 4: 4: 4, 4: 2: 2, or 4: 2: 0 Color bit depth1 8 bits per color Signal Type HDMI 1.4, HDCP 1.4 Max. video data rate 10.2 Gbps (3.4 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator atwww.extron.com/8Kdatarateto determine video parameters supported by this data rate. Video Maximum data rate 10.2 Gbps (3.4 Gbps per color) Maximum pixel clock 300 MHz (600 MHz for 4K rates with 4: 2: 0 chroma subsampling) Resolution Up to 1920 x 1200 or 1080p @ 60 Hz, 12-bit color 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz 4K/UHD @ 60 Hz with 4: 2: 0 chroma subsampling Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI 1.4, HDCP 1.4 NOTE The DTP T SW4 HD 4K switchers support TMDS data rates up to10.2 Gbps, Deep Color up to 12-bit, 3D, HD lossless audio, and other HDMI specification features. NOTE Extron strongly recommends compatibility testing while designing and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The 3D support in this porduct is limited to signals operating within 164 MHz pixel clock and requires format and EDID compatibility between source and sink devices. Please contact an Extron Application Engineer for more information. Video input Number/signal type 4 single link HDMI (or DVI-D*) Connectors 4 female HDMI type A NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. Video output Number/signal type 1 DTP 330 or HDBT Output Connectors 1 RJ-45 Jack Interconnection between transmitter and receiver Connectors 1 female RJ-45 per unit Termination standard TIA/EIA T568B Signal transmission distance 1080p @ 60 Hz Up to 330 (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable 2560x1600 @ 60 Hz Up to 330 (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable 4K/UHD @ 30 and 60 Hz Up to 330 (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. Control/remote Switcher Serial control port 1 RS-232, 3.5 mm,3 polecaptive screw connector Pin configuration 1 = Tx, 2 = Rx, 3 = GND Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity Auto-input switching (1) 3.5 mm,2 pole captive screw connector Pin configuration Pins1 and2 of captive screw connector shorted together enable auto-input switching. Contact closure (3) 3.5 mm captive screw, 2-pole (shared with Tally output) (2) 3.5 mm captive screw, 4-pole (shared with Tally output) Tally output (3) 3.5 mm captive screw, 2-pole (shared with Contact closure) (2) 3.5 mm captive screw, 4-pole (shared with Contact closure) Tally output power +5 VDC, 0.2 A IR controller module IR 102 remote control (optional) 30 maximum, 40 degrees off axis USB control ports 1 front panel female mini USB, type B USB standards USB 2.0, low speed Program control Extron PCS Software for Windows, Extron Simple Instruction Set (SIS) General Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts Power consumption Device 7.7 watts Device and power supply 8.7 watts Remote power budget 12 watts Ambient temperature/humidity Storage: -40 to +158F (-40 to +70C) / 10% to 90%, noncondensing Operating: +32 to +122F (0 to +50C) / 10% to 90%, noncondensing Cooling Convection, no vents Thermal dissipation Device 26.0BTU/hr Device and power supply 29.6BTU/hr Mounting Rack mount Yes, with optional 1U rack shelf Furniture mount Yes, with optional under-desk mounting kit or through-desk mounting kit Enclosure type Metal Enclosure dimensions 1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) (4.4 cm H x 22.2 cm W x 7.6 cm D) (Depth excludes connectors.) Product weight 0.5 lb (0.3 kg) Regulatory compliance CE, C-Tick, c-UL, UL, FCC Class A, ICES, VCCI, RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor