10G Pro AV Over IP Encoder-HDMI-Decorator-Style Wallplate

Product Description

Key FeaturesExpanded AES67 capabilities enable any NAV encoder or decoder to transmit or receive an AES67 audio streamConfidence Preview available in the endpoint or NAVigator browser interfaceDecorator-style wallplate designEncodes and streams video and audio over 1Gbps Ethernet networksSupports HDMI2.0 at resolutions up to 4K/60 @ 4: 4: 4PURE3 Codec specification Frame rate2 24, 25, 30, 50, or 60 fps Chroma sampling2 4: 4: 4, 4: 2: 2, or 4: 2: 0 Color bit depth2 8, or 10 bits per color Signal Type DVI v1.0, HDMI v1.4 and v2.0, HDCP v1.4 and v2.3 Max. video data rate 18 Gbps (6 Gbps per color) NOTE 14096 x 2160 @ 50-60 Hz is available only for HDMI connectors. NOTE 2Subject to the maximum data rate limit. Use our calculator atwww.extron.com/8Kdatarateto determine video parameters supported by this data rate. Video input and loop through NOTE *Appropriate DVI-D to HDMI or DisplayPort to HDMI cables or adapters are required for DVI or DisplayPort signal input. Number/signal type 1 digital HDMI video* 1 digital HDMI video (loop through) Connectors 2 female HDMI type A: 1 for input, 1 for loop through Resolution range Up to 4K (4096x2160at 60 Hz) and UHD (3840x2160 at 60 Hz) Standards DVI v1.0, HDMI v1.4 and v2.0, HDCP v1.4/v2.3 Video processing Digital sampling 8 or 10 bits per color; 600 MHz pixel clock maximum Compression PURE3 Bit rate 250 Mbps to 900 Mbps Latency <1 frame (encode/decode) NOTE Indicates minimum latency. Network and video processing dependencies apply. Video output stream Number/signal type 1 PURE3 digital video over IP Connector 1 RJ-45 connector Audio Sampling Rates 32, 44.1, 48 kHz Bit depths 16, 20, 24 bit Audio input Number/signal type 1 digital stereo, de-embedded from HDMI Connectors 1 female HDMI type A (shared with video input) Supported formats LPCM (2 channel) Audio output stream Number/signal type 1 audio over IP LPCM 1 audio over IPAES67* Connector 1 RJ-45 connector NOTE *AES67 specifications are compatible with the Extron DSPs. Network interconnection (NAV) Connector type 1 RJ-45 Ethernet standards 1GbE (802.3ab), 10/100/1000 Base-T, half/full duplex with autodetect Termination Auto-MDIX, TIA/EIA T568B Power over Ethernet (PoE) Complies with IEEE 802.3at Type 2 (PoE+), class 4 Protocols Streaming SRTP (AES-128) on video and audio Transport Multicast UDP All supported DHCP, HTTPS, IGMPv2/v3, IPv4, PTPv2, QoS, SSH, TCP, UDP Security AES-256, 802.1X, Active Directory authentication Signal transmission distance 330 (100 m) using CAT 5e/6/6a/7 cables Network extension (EXT) Connector 1 RJ-45 female Termination Auto-MDIX, TIA/EIA T568B Ethernet standards 1Gbe, (802,3ab), 10/100/1000 Base-T, half/full duplex with autodetect Signal transmission distance 330 (100 m) using CAT-5e/6/6a/7 cables Communications - external devices Serial Quantity/type 1 bidirectional RS-232 Connector (1) 3.5 mm captive screw connector, 5 pole (shared with IR port) Baud rate and protocol 300to 115200 baud (9600 baud = default) 8 (default) or 7 data bits 1 (default) or 2 stop bits no parity (default), even or odd parity Pin configuration Tx, Rx, and Gnd IR control Quantity/type 1 TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz Connector (1) 3.5 mm captive screw connector, 5-pole (shared with RS-232) Pin configuration S = signal and G = Gnd IR output carrier frequency 30 kHz to 300 kHz USB configuration port Quantity/type 1 front panel USB mini-B Standard Ethernet over USB General Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 2.0 A, 24 watts NOTE Each 1G endpoint can be powered either locally by an external power supply or remotely using optional PoE+. Power consumption Device 20.1 watts Device and power supply 22.9 watts PoE Complies with IEEE 802.3at Type 2 (PoE+), class 4 Ambient temperature/humidity Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +104 F (0 to +40 C) / 10% to 85%, noncondensing Cooling Fan, air flows from bottom to top Thermal dissipation Device 67.7 BTU/hour Device and power supply 77.2 BTU/hour Device with PoE 77.7 BTU/hour Mounting Rack mount No Furniture or wall mount Yes, in a standard US 3-gang electrical junction box or mud ring. Enclosure type Metal Enclosure Faceplate 4.5" H x 6.4" W x 0.72" D (11.4 cm H x16.3 cm W x 1.82 cm D) Device 2.72" H1x 5.29" W x 1.81" D2(6.9 cm H1x13.4 cm W x4.6 cm D2)