4K-60 HDMI DTP3 Receiver with Audio De-Embedding

Product Description

Key FeaturesReceives HDMI plus control up to 330 (100m) over a shielded CAT6A cableSupports computer and video resolutions up to 4K/60 @ 4: 4: 4Stereo audio deembeddingHDCP 2.3 compliantSupported HDMI 2.0b specification features include data rates up to 18Gbps, HDR, Deep Color up to 12bit, 3D, HDlossless audio formats, and CEC passthroughRemote power capability with DTP3 products specification Frame rate1 24, 25, 30, 50, or 60fps Chroma sampling1 4: 4: 4, 4: 2: 2,or 4: 2: 0 Color bit depth1 8, 10, 12bits per color Signal Type HDMI 2.0b, HDCP 2.3 Max. video data rate 18Gbps (6 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator atwww.extron.com/8Kdatarateto determine video parameters supported by this data rate. Video Maximum data rate 18 Gbps (6 Gbps per color) Maximum pixel clock 600 MHz Resolution range Up to 1080p @ 120 Hz or 4K @ 60 Hz (4: 4: 4 subsampling) 5120x1080* @ 30 Hz, 5120x1440* @ 30Hz, 5120x2160 @ 30 Hz, 5120x2560* @ 30 Hz, 5120x2880* @ 30 Hz NOTE *Indicated rates not available via standard 256-byte EDID and may require custom video card configuration. Horizontal Frequency Range 15 kHz to 270 kHz for resolutions up to 18 Gbps Vertical frequency range 24 Hz to 240 Hz for resolutions up to 18 Gbps Color bit depth 8, 10, or 12 bits subject to the maximum data rate limit Formats RGB and YCbCr digital video HDR HDR10, HDR10+, Dolby Vision Standard DVI 1.0, HDMI 2.0b, HDCP 1.x, HDCP 2.3 NOTE Extron strongly recommends compatibility testing while designing, and before installing, any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Applications Engineer for more information. Video Input Number/signal type HDMI input 1 HDMI (or single link DVI-D, with appropriate DVI-HDMI adapters) Connector HDMI input 1 female HDMI type A Video Output Number/signal type 1 single link HDMI or DVI-D* (Loop through) 1 DTP3 (Output) Connectors 1 female HDMI (loop through) 1 female RJ-45 NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. Interconnection Between Transmitter and Receiver Connector 1 female RJ-45 per unit Termination standard TIA/EIA T568B Signal Transmission Distance (using XTP DTP 24 cable) 1080p @ 60 Hz Up to 330 (100 m) using shielded twisted pair STP or XTP DTP 24 cable 4K/UHD @ 30 Hz Up to 330 (100 m) using shielded twisted pair STP or XTP DTP 24 cable 4K/UHD@ 60 Hz (1) Up to 150 (45 m) using shielded twisted pair STP or XTP DTP 24 cable Using 1 coupler with 3 (0.9 m) to 9 (2.7 m) patch cable Using 2 couplers with two 3 (0.9 m) (max) patch cables (each patch cable cannot exceed 3) Using two punch downs with two 3 (0.9 m) to 9 (2.7 m) patch cables 4K/UHD@ 60 Hz (2) Up to 175 (53 m) using shielded twisted pair STP or XTP DTP 24 cable with no couplers Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) Signal Transmission Distance (using XTP DTP 22 cable) 1080p @ 60 Hz Up to 330 (100 m) using XTP DTP 22 cable 4K @ 30 Hz Up to 330 (100 m) using XTP DTP 22 cable 4K/UHD@ 60 Hz (1), (2) Up to 330 (100 m) using XTP DTP 22 cable Using 1 coupler with 3 (0.9 m) to 16 (4.9 m) patch cable Using 2 couplers with 4 (1.2 m) (max) patch cables (each patch cable cannot exceed 4) Using two punch downs with 3 (0.9 m) to 8 (2.4 m) patch cables Cable requirements Solid conductor, 22 AWG or better Cable recommendations 500 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 22 shielded twisted pair cable is strongly recommended for optimal performance. (1) With coupler(s), (2) No coupler(s) Communications Control/Remote Transmitter USB control port 1 front panel, female USB type C USB standards USB 2.0, low speed Program control Extron Simple Instruction Set (SISTM) Extron Product Configuration Software (PCS) Control/Remote External Device (RS-232 Over TP) Serial control pass-through ports 1 RS-232, 3.5, mm 3-pole captive screw connector Baud rate and protocol 300 to 115200 baud Protocol 8 or 7 data bits 1 or 2 stop bits No parity (default), even or odd parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd NOTE Protocol is mirrored between the connected DTP3 Rx endpoints and the "Over TP". Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP3 endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints. There is no RS-232 insertion from any DTP3 control port to the "Over TP" ports. General Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 2 A, 24 watts Power consumption Device 7.16 watts Device and power supply 8.10 watts Remote power budget 18.0 watts NOTE The transmittercan be powered either locally by an external power supply or remotely by a receiveron the other end of thetwisted paircable. Ambient temperature/humidity Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing Cooling Convection, vents on top and sides Thermal dissipation Device 23.49 BTU/hr Device and power supply 26.71 BTU/hr Mounting Rack mount Optional 1U high rack shelf Furniture mount Optional under-desk mount kit Enclosure type Metal Enclosure dimensions 1.0" H x 4.3" W x 6.0" D (quarter rack wide) (25 mm H x 109 mm W x152 mm D) (Depth excludes connectors.) Product weight TBD lbs (TBD kg) Regulatory compliance CE, c-UL, UL, C-tick, FCC Class A, ICES, VCCI Complies with appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor