1G Pro AV over IP Encoder with DTP Input

Product Description

Key Features New Expanded AES67 capabilities enable any NAV encoder or decoder to transmit or receive an AES67 audio stream New Confidence Preview available in the endpoint or NAVigator browser interface Works with over 40 wallplate and floor box DTP transmitters available in a variety of architectural form factors. DisplayPort, DVI and HDMI inputs available in MK, EU, and decorator-style packages Converts, encodes, and streams video and audio signals from DTP transmitters over 1Gbps Ethernet networks Supports HDMI2.0 at resolutions up to 4K/30 @ 4: 4: 4 PURE3Codec specification Frame rate1 24, 25, 30, 50, or 60 fps Chroma sampling1 4: 4: 4, 4: 2: 2, or 4: 2: 0 Color bit depth1 8 bits per color Signal Type DVI v1.0, HDMI v1.4, HDCP v1.4 and v2.3 Max. video data rate 10.2 Gbps (3.4 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate. Video input and loop through NOTE *Appropriate DVI-D to HDMI or DisplayPort to HDMI cables or adapters are required for DVI or DisplayPort signal loop-through. Number/signal type 1 DTP 1 digital HDMI video (loop through) Connectors 1 female RJ-45 (input) 1 female HDMI type A (loop through) Resolution range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4: 2: 0 chroma subsampling (* reduced blanking) Standards DVI v1.0, HDMI v1.4, HDCP v1.4/v2.3 Video processing Digital sampling 8 or 10 bits per color; 300 MHz pixel clock maximum Compression PURE3 Bit rate 250 Mbps to 900 Mbps Latency <1 frame (encode/decode) NOTE Indicates minimum end-to-end latency. Network and video processing dependencies may apply. Video output stream Number/signal type 1 PURE3 digital video over IP Connector 1 RJ-45 connector Audio Gain Analog to analog Unbalanced output: -12.5 dBu, balanced output: -6.5 dBu HDMI to analog Unbalanced output: -11.3 dBu, balanced output: -5.3 dBu Frequency response 20 Hz to 20 kHz, +0.5 dB THD + Noise <0.1% @ 20 Hz to 20 kHz at nominal level S/N Analog to Digital: >90dB, at Full scale output, unweighted Digital to Analog: >90dB, at Maximum balanced output, unweighted Analog to Analog: >90dB, at Maximum balanced output, unweighted Crosstalk <-80 dB @ 1 kHz, fully loaded Stereo channel separation >80 dB @ 1 kHz Sampling Rates 32, 44.1, 48 kHz Bit depths 16, 20, 24 bit Audio input Number/signal type 1 DTP (de-embedded HDMI - PCM only or remote unbalanced analog) Connectors 1 RJ-45 female (shared with video input) Supported formats LPCM (2 channel), analog stereo audio Impedance >10k ohms unbalanced, >20k ohms balanced Nominal level +4 dBu, -10 dBV configurable Maximum level +21 dBu balanced, +15 dBu unbalanced Gain adjustment range Adjustable, -18 dB to +10 dB NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu Audio output stream Number/signal type 1 audio over IP LPCM 1 audio over IP AES67* Connector 1 RJ-45 connector NOTE *AES67 specifications are compatible with the Extron DSPs. Network interconnection (NAV) Connector type 1 RJ-45 Ethernet standards 1GbE (802.3ab), 10/100/1000 Base-T, half/full duplex with autodetect Termination Auto-MDIX, TIA/EIA T568B Protocols Streaming SRTP (AES-128) on video and audio Transport Multicast UDP All supported DHCP, HTTPS, IGMPv2/v3, IPv4, PTPv2, QoS, SSH, TCP, UDP Security AES-256, 802.1X, Active Directory authentication Signal transmission distance 330 (100 m) using CAT 5e/6/6a/7 cables Communications - external devices Serial Quantity/type 1 bidirectional RS-232 Connector 1 RJ-45 DTP pass-through SPD port (shared with IR and CEC) Baud rates 300 to 115200 baud (9600 = default) Protocol 8 (default) or 7 data bits 1 (default) or 2 stop bit no parity (default), even or odd parity IR control Quantity/type 1 unidirectional infrared Connector 1 RJ-45 DTP pass-through SPD port (shared with RS-232 and CEC) IR output carrier frequency 30 kHz to 60 kHz USB configuration port Quantity/type 1 front panel USB mini-B Standard Ethernet over USB General Power supply Internal Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 4.0A, 48 watts Power consumption Device and power supply 35.13 watts Ambient temperature/humidity Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +104 F (0 to +40 C) / 10% to 85%, noncondensing Cooling Fan, air flows from front to rear Thermal dissipation Device and power supply 110.0 BTU/hour Mounting Rack mount Yes, with optional rack shelf Furniture mount Yes, with optional under desk mounting kit Enclosure type Metal Enclosure 1.66" H x 8.75" W x 10.5" D (half rack wide) (42 mm H x 222 mm W x 267 mm D) Product weight 2.85 lbs (1.3 kg) Regulatory compliance CE, c-UL UL,C-tick, FCC Class A, ICES, VCCI, Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor