Meeting Space Collaboration System-Decorator-Style Wallplate

Product Description

Key FeaturesPowerful, cost-effective solution for meeting roomsDecorator-style wallplate transmitter provides one HDMI inputHDMI input on receiver is ideal for connecting a local source, such as a ShareLink Series wireless collaboration gatewaySignal extension for video, audio, and power up to 230feet (70meters) over a shielded CATx cableSupports computer and video resolutions up to 1920x1200, including 1080p/60 and 2KSelectable output rates from 640x480 to 1920x1200, including 1080p/60 and 2K Video input Number/signal type Digital HCT 101 D 1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter) HCR 102 1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter) Connectors HCT 101 D 1 female HDMI type A HCR 102 1 female HDMI type A HDMI equalization Automatic HDMI input cable length 50 (15 m) for resolutions up to 1920x1200 or 1080p @ 60 Hz; 2K, using Extron HDMI Pro Series cable Resolution range 640x480 to 1600x1200 and 1920x1200*, 480p, 576p, 720p, 1080i, 1080p, and 2K *reduced blanking Return loss <-40 dB @ 5 MHz DC offset (max. allowable) 1.5 V Standards DVI 1.0, HDMI 1.4, HDCP 1.4 Interconnection between transmitter and receiver Connector 1 female RJ-45 on each unit (transmitter and receiver) Termination standard TIA/EIA T568B Transmission distance Up to 230 (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable with a 1080p, 60 Hz signal Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. Video processing Decoder 12 bit digital (3D-adaptive comb filter) Digital pixel data bit depth 8, 10, or 12 bits per channel; 165 MHz pixel clock Colors 1 billion (10 bit processing) Video output Number/signal type 1 HDMI (with CEC) Connectors 1 female HDMI HDMI peripheral device power 250 mA Scaled resolution 640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8 HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 1= at 23.98 Hz,2= at 24 Hz,3= at 25 Hz,4= at 29.97 Hz,5= at 30 Hz,6= at 50 Hz,7= at 59.94 Hz,8= at 60 Hz,9= at 75 Hz Audio Gain Unbalanced output: 0 dB; balanced output +6 dB Frequency response 20 Hz to 20 kHz, 0.5 dB THD + Noise 0.03%, 20 Hz to 20k Hz at nominal level S/N >90 dB, at maximum output (15 dBu), balanced (unweighted) Crosstalk -80 dB @ 1 kHz, fully loaded Stereo channel separation >80 dB @ 1 kHz to 20 kHz Audio input Number/signal type 1 analog stereo, unbalanced or 2 digital audio, embedded in the HDMI signal NOTE Analog audio is not embedded onto the HCT 101 HDMI digital signal. You can select analog audioor digital embedded audio using Extron PCS Product Configuration Software. Connectors 1 female 3.5 mm mini stereo jack; tip (L), ring (R), sleeve (ground) 2 female HDMI Type A Source formats Analog Analog stereo audio HDMI LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel Impedance 10k ohms, DC coupled Nominal level -10 dBV (316 mVrms), unbalanced Maximum level +7 dBV, unbalanced CMRR >60 dB typical, unbalanced, @ 1 kHz NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu Audio output Number/signal type 1 analog, line level stereo, balanced or unbalanced (variable) 1 digital, embedded in HDMI (fixed) Connectors (1) 3.5 mm captive screw connector, 5 pole 1 female HDMI Impedance 50 ohms unbalanced, 100 ohms balanced Gain error 0.5 dB channel to channel Maximum level (Hi-Z) >+15 dBu, balanced; >+9 dBu, unbalanced Output volume range 0 to 100% in 1% steps Communications USB control port 1 front panel female USB mini-B USB standards USB 2.0, high speed Program control Extron Product Configuration Software (PCS) for Windows Communications control processor Memory SDRAM 512 MB Flash 512 MB Software Configuration software Extron Global ConfiguratorPlus and Professional Utilities Toolbelt, embedded web page Ethernet Network interface controllers (NICs) 1 Connectors 1 female RJ-45 connector Data rate 10/100Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1 Serial Quantity/type 1 bidirectional RS-232 Connectors (1) 3.5 mm captive screw connector, 3-pole Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity NOTE This 3-pole port supports software flow control. The default is no flow control. Pin configuration Pin 1 = Tx, 2 = Rx, 3 = Gnd Digital I/O Quantity/type 4 digital input/output (configurable) Connectors (1) 3.5 mm captive screw connector, 6-pole Digital inputs Input voltage range 0 to 24 VDC, clamped at +30 VDC Input impedance >10k ohms Programmable pullup 1k ohms to +5 VDC Threshold low to high 2.8 VDC Threshold high to low 2.0 VDC Digital outputs 250 mA sink from 24 VDC max. Pin configurations Pins 1, 2, 4, 5 = digital I/Os 1, 2, 3, 4; pins 3, 6= Gnd IR Quantity/type 1programmable TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz Connector (1) 3.5 mm captive screw connector, 2-pole Pin configuration Pin 1 = signal, 2 = Gnd IR output carrier frequency 30 kHz to 300 kHz General Power supply External, included Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 4.2 A, 50 watts Power consumption System Device 17.2 watts Device and power supply 19.6 watts NOTE Connect the included 4.2 A, 50 W, external power supply to the HCR 102, and the receiver remotely powers the HCT 101 D. Alternatively, the transmitter can be powered locally by an optional external power supply. Ambient temperature/humidity Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +104 F (0 to +40 C) / 10% to 90%, noncondensing Cooling Convection, vents on top and sides Thermal dissipation System Device 57.6 BTU/hour Device and power supply 65.7 BTU/hour Mounting HCT 101 D Furniture or wall mount Yes, with 1-gang junction box or mud ring mounting bracket and the included decorator-style wallplate or an optional AAP 314 or AAP 424 panel HCR 102 Rack mount Yes, with optional 1U high rack shelf or back of the rack mounting kit Furniture mount Yes, with included, attached MBU 125 under-desk mounting brackets Enclosure type Metal Enclosure dimensions HCT 101 D Faceplate 2.61" H x 1.29" W x 0.25" D (66 mm H x 33 mm W x 6.4 mm D) Device 2.72" H x 1.68" W x 1.87" D (69 mm H x 43 mm W x 48 mm D) (Depth excludes connectors, height excludes mounting tabs. Overall height is 4.20" (107 mm), including mounting tabs. Mounting holes are 3.2" (82 mm) apart on center. Fits the opening in a 1 gang decorator wallplate. Allow at least 3.0", 76 mm, depth in the wall or furniture.) HCR 102 1.0" H x 8.75" W x 6.0" D (half rack wide) (25 mm H x222 mm W x 152 mm D) (Depth excludes connectors.) Product weight HCT 101 D 0.2 lb (0.1 kg) HCR 102 1.2 lbs (0.6 kg) Regulatory compliance CE, C-tick, c-UL, FCC Class A, ICES, UL, VCCI Complies with the appropriate requirements of RoHS, WEEE