8K HDMI Input And Output Boards

Product Description

Key FeaturesFour HDMI inputs or four HDMI outputs with stereo audioSupports computer and video resolutions up to 8K @ 4: 4: 4HDCP 2.3 compliantAutomatic input cable equalizationAutomatic output reclockingSupport for HDR - High Dynamic Range video Video XTP II CP 4i HD 8K, XTP II CP 4o HD 8K, XTP II CP 4o HD AT 8K NOTE Support for uncompressed 8K/30 at 4: 4: 4 color sampling requires installation in an XTP II CrossPoint frame. NOTE *AppropriateHDMI to DVI-D cables or adapters are required forDVI signal input and output. NOTE Extron strongly recommends compatibility testing while designing, and before installing, any 3D or HDR (high dynamic range) system. There are several unique 3D and HDR formats in use by source devices and display manufacturers. The level of 3D and HDR product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Applications Engineer for more information. Gain Unity Resolution range Up to 8K (7680x4320) @ 60 Hz, 5K (5120x2880) @ 60 Hz, 4K (4096x2160) @ 60 Hz, 4K (3840x2160) @ 120 Hz, UHD (3840x2160) @ 60 Hz Signal Type Single-link HDMI (or DVI-D*) Digital video RGB digital video or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 7680x4320 @ 60 Hz) EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards HPD Supports hot plug detection (HPD) of display as a pass-through signal. Maximum data rate 40.1 Gbps Maximum pixel clock 1190 MHz Standards DVI 1.0, HDMI 2.1, HDCP 2.3 Video format HDMI and DVI HDR HDR10, HDR10+, and Dolby Vision Video input XTP II CP 4i HD 8K, XTP II CP 4o HD 8K Number/signal type 4 HDMI 2.1 links Connectors 4 female HDMI type A Equalization Automatic NOTE Lower resolutions may support longer transmission distances. Transmission distance varies depending on the signal resolution, type of cable, and source device used in the system. Horizontal frequency 15 kHz to 270 kHz for resolutions up to 40.1 Gbps Vertical frequency 24 Hz to 240 Hz for resolutions up to 40.1 Gbps Peripheral device power 12 VDC, 125 mA per input Connectors (4) 3.5 mm captive screw connectors, 2-pole Video output XTP II CP 4o HD 8K, XTP II CP 4o HD AT 8K Number/signal type 4 HDMI 2.1 links Connectors 4 female HDMI type A Re-clocking Automatic Peripheral device power 5 VDC, 250 mA per output Audio input XTP II CP 4i HD 8K Number/signal type 4 analog stereo, balanced/unbalanced or 4 digital audio, de-embedded from HDMI Connectors (4) 3.5 mm captive screw connector, 5-pole 4 female HDMI type A (shared with video input) Supported formats Pass through HDMI Connector LPCM up to 7.1/24-bit/192 kHz, DolbyDigital EX, Dolby Digital Plus, Dolby Digital 5.1, Dolby Digital 2.0 Surround, Dolby Digital 2.0, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS-X, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2-Channel Analog connector Analog stereo audio Impedance >10k ohms unbalanced/balanced, DC coupled Nominal level +4 dBu (1.228 Vrms) Maximum level +21 dBu balanced, +15 dBu unbalanced Input gain adjustment -18 dB to +18 dB, adjustable per input; default = 0 dB Audio output XTP II CP 4o HD 8K Number/signal type 4 analog stereo, balanced/unbalanced 4 digital audio, embedded with HDMI Connectors (4) 3.5 mm captive screw connector, 5-pole 4 female HDMI type A (shared with video output) Supported formats Pass through HDMI Connector LPCM up to 7.1/24-bit/192 kHz, DolbyDigital EX, Dolby Digital Plus, Dolby Digital 5.1, Dolby Digital 2.0 Surround, Dolby Digital 2.0, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS-X, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2-Channel Analog connector Analog stereo Impedance 50 ohms unbalanced, 100 ohms balanced Gain error 0.1 dB channel to channel Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 1% THD+N Maximum level (600 ohm) >+20 dBm, balanced or unbalanced at 1% THD+N Volume control range -64 dB to 0 dB (volume numbers 0 through 64) in 1 dB increments from steps 0 to 64; default = 64 (0 dB) NOTE Attenuation = volume number minus 64. The default is 0 dB = volume number 64. AT ports audio transport (XTP II CP 4o HD AT 8K only) Transmission type Dante/AES-67, software selectable Connectors (2) RJ-45 to Dante interface Outputs Up to 8 channels (4 stereo channels) Audio format Uncompressed, 24-bit, 48 kHz Latency Deterministic, based on user selection: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms General Power Supplied by XTP CrossPoint or XTP II CrossPoint enclosure Power consumption XTP II CP 4i HD 8K 20 watts XTP II CP 4o HD 8K 14 watts XTP II CP 4o HD AT 8K 15 watts Product weight 2.10 lbs (0.95 kg) Regulatory compliance UL, FCC Class A Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor