4K-60 HDMI Input and Output Boards

Product Description

Key FeaturesFour HDMI inputs or outputs with stereo audioSupports computer and video resolutions up to 4K/60 @ 4: 4: 4HDCP 2.3 compliantSupport for HDR - High Dynamic Range videoMulti-channel audio downmixingDanteaudio output enables transport over a local area network using standard Internet protocols Video XTP II CP 4i HD 4K PLUS,XTP II CP 4i HD DMA 4K PLUS, XTP II CP 4o HD 4K PLUS, XTP II CP 4o HD AT 4K PLUS NOTE Support for 4K/60 at 4: 4: 4 color subsampling requires installation in an XTP II CrossPoint frame. NOTE *AppropriateHDMI to DVI-D cables or adapters are required forDVI signal input and output. NOTE Extron strongly recommends compatibility testing while designing, and before installing, any 3D or HDR (high dynamic range) system. There are several unique 3D and HDR formats in use by source devices and display manufacturers. The level of 3D and HDR product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Applications Engineer for more information. Gain Unity Resolution range Up to 1080p @ 240 Hz or 4K @ 60 Hz (4: 4: 4 color subsampling) Signal type Single-link HDMI (or DVI-D*) Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 4096x2160 @ 60 Hz) EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards HPD Supports hot plug detection (HPD) of display as a pass-through signal. Maximum data rate 18 Gbps (6 Gbps per color) Maximum pixel clock 600 MHz Standards DVI 1.0, HDMI 2.0b, HDCP 2.3 Video format HDMI and DVI HDR HDR10, HDR10+, and Dolby Vision Video input XTP II CP 4i HD 4K PLUS, XTP II CP 4i HD DMA 4K PLUS Number/signal type 4 digital RGB single-link HDMI (or DVI-D*) Connectors 4 female HDMI type A Equalization Automatic Input cable length Up to 25 (7.62m) at 3840x2160 and 4096x2160 @ 60 Hz 4: 4: 4 8 bits NOTE Lower resolutions may support longer transmission distances. Transmission distance varies depending on the signal resolution, type of cable, and source device used in the system. Horizontal frequency 15 kHz to 270 kHz for resolutions up to 18 Gbps Vertical frequency 24 Hz to 240 Hz for resolutions up to 18 Gbps Video output XTP II CP 4o HD 4K PLUS, XTP II CP 4o HD AT 4K PLUS Number/signal type 4 digital RGB single-link HDMI (or DVI-D*) Connectors 4 female HDMI type A Re-clocking Automatic Peripheral device power 5 VDC, 250 mA per output Audio input XTP II CP 4i HD 4K PLUS, XTP II CP 4i HD DMA 4K PLUS Number/signal type 4 analog stereo, balanced/unbalanced or 4 digital audio, de-embedded from HDMI Connectors (4) 3.5 mm captive screw connector, 5 pole 4 female HDMI type A (shared with video input) Supported formats Pass through HDMI Connector LPCM up to 7.1/24-bit/192 kHz, DolbyDigital EX, Dolby Digital Plus, Dolby Digital 5.1, Dolby Digital 2.0 Surround, Dolby Digital 2.0, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS-X, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2-Channel Analog connector Analog stereo audio Impedance >10k ohms unbalanced/balanced, DC coupled Nominal level +4 dBu (1.228 Vrms) Maximum level +21 dBu balanced, +15 dBu unbalanced Input gain adjustment -18 dB to +18 dB, adjustable per input; default = 0 dB Audio output XTP II CP 4o HD 4K PLUS Number/signal type 4 stereo, balanced/unbalanced 4 digital audio, embedded with HDMI Connectors (4) 3.5 mm captive screw connector, 5 pole 4 female HDMI type A (shared with video output) Supported formats Pass through HDMI Connector LPCM up to 7.1/24-bit/192 kHz, DolbyDigital EX, Dolby Digital Plus, Dolby Digital 5.1, Dolby Digital 2.0 Surround, Dolby Digital 2.0, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS-X, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS-Digital Surround 5.1, DTS 2-Channel Analog connector Analog stereo audio Impedance 50 ohms unbalanced, 100 ohms balanced Gain error 0.1 dB channel to channel Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 1% THD+N Maximum level (600 ohm) >+20 dBm, balanced or unbalanced at 1% THD+N Volume control range -64 dB to 0 dB (volume numbers 0 through 64) in 1 dB increments from steps 0 to 64; default = 64 (0 dB) NOTE Attenuation = volume number minus 64. The default is 0 dB = volume number 64. AT ports audio transport (XTP II CP 4o HD AT 4K PLUS only) Transmission type Dante/AES-67, software selectable Connectors (2) RJ-45 to Dante interface Outputs Up to 8 channels (4 stereo channels) Audio format Uncompressed, 24-bit, 48 kHz Latency Deterministic, based on user selection: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms General Power Supplied by XTP CrossPoint or XTP II CrossPoint enclosure Power consumption XTP II CP 4i HD 4K PLUS 18 watts XTP II CP 4i HD DMA 4K PLUS 20 watts XTP II CP 4o HD 4K PLUS 14 watts XTP II CP 4o HD AT 4K PLUS 14 watts Product weight 2.0 lbs (0.9 kg) Regulatory compliance UL, FCC Class A Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor