12G-SDI Input Board With SDI And HDMI Input Loop-Through

Product Description

Key FeaturesFour 12G-SDI inputsSupports 12GSDI, 6GSDI, 3GSDI, and HDSDI signalsAutomatically adapts to SMPTE and ITU digital video standardsSupports data rates from 1.49Gbps to 11.88GbpsBuffered SDI and HDMI input loop-throughsAutomatic input cable equalization Video Number/signal type (4) 12G-SDI, 6G-SDI, 3G-SDI, and HD-SDI digital video signals Connectors 4 female BNC, 4 female BNC loop-through (input card only), 4 female HDMI (input card only) Nominal level 0.8 Vp-p Impedance 75 ohms Horizontal frequency 15 kHz to 135 kHz Vertical frequency 24 Hz to 60 Hz Resolution range 720p, 1080i, 1080PsF, 1080p, and 2K (2048x1080), 4096x2160p @30 Hz 4: 2: 2 10-bit, and 2160p @ 60Hz 4: 2: 2 10-bit Return loss 15 dB @ 5 MHz to 1.5 GHz Input cable equalization Automatic for up to -30 dB of cable loss 12G-SDI 70 m (230) using RG7 cable 6G-SDI 100 m (330) using RG6 cable 3G-SDI 188 m (618) using RG6 cable HD-SDI 258 m (847) using RG6 cable Operation standards SMPTE 292M, SMPTE 424M, SMPTE ST-2081, SMPTE ST-2082, SMPTE 272M, SMPTE 299M, ITU-R BT.1120 Level mapping Supports level A mapping Auto data rate lock Yes Audio Frequency response 20 Hz to 20 kHz 0.5 dB THD + Noise <0.1% @ 1 kHz, 20 kHz bandwidth at nominal level S/N >90 dB, at maximum output (unweighted) Stereo channel separation >80 dB @ 1 kHz Audio input Number/signal type 4 SDI embedded AES3 audio (SMPTE 272M, SMPTE 299M) Connectors 4 female BNC Impedance 10k ohms unbalanced, >20k ohms balanced Nominal level +4 dBu (1.23 Vrms), -10dBv (316 mVrms), adjustable Maximum level +21 dBu (balanced) +15 dBu (unbalanced) Input gain adjustment -18 dB to +24 dB, adjustable per input; default = 0 dB NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu Audio output Number/signal type 4 SDI embedded AES3 audio (SMPTE 272M, SMPTE 299M) 4 stereo/mono, balanced/unbalanced Connectors 4 female BNC (4) 5 pole captive screw Impedance 10k ohms unbalanced, >20k ohms balanced Maximum level +21 dBu (balanced) +15 dBu (unbalanced) Output volume range 0 dB to -100 dB in 1.0 dB steps General Power Supplied by XTP CrossPoint or XTP II CrossPoint enclosure Power consumption 37.2 watts Product weight 2.0 lbs (0.9 kg) Regulatory compliance Environmental Complies with the appropriate requirements ofRoHS, WEEE. Product warranty 3 years parts and labor