TouchLink Control Port Expansion Adapter

Product Description

Key FeaturesTransform your touchpanel into an all-in-one control system using LinkLicense for TLP Control Processor and the TLCA 1 TouchLink Control Port Expansion AdapterTwo bidirectional RS-232 portsOne digital inputOne IR portTwo relays USB Connectors (1) Male micro-B Digital input Quantity/type 1 digital input Connector (1) 3.5 mm direct insertion captive screw connector, 2 pole Input voltage range 0 to 24 VDC, clamped at +30 VDC Input impedance 10k ohms Programmable pullup 1k ohms to +5 VDC Threshold low to high 2.8 VDC Threshold high to low 2.0 VDC Serial Quantity/type 2 bidirectional RS-232 Connector (2) 3.5 mm direct insertion captive screw connector, 5 pole Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 data bits (default) or 7 data bits 1 (default) or 2 stop bits; no parity (default), even, odd NOTE This port supports software flow control. The default is no flow control. Relay Quantity/type 2 normally open relays Connector (1) 3.5 mm direct insertion captive screw connector,3 pole Relay control contact rating 24 VDC, 1 A IR Quantity/type TTL level (0 to 5 V) infrared (carrier or non-carrier)up to 300 kHz Connector (1) 3.5 mm direct insertion captive screw connector, 2 pole IR output carrier frequency 30 kHz to 300 kHz General Power input requirements USB Ambient temperature/humidity Storage: -4 to +140 F (-20 to +60 C) / 10% to 90%, noncondensing Operating: +32 to +104 F (0 to +40 C) / 10% to 90%, noncondensing Cooling Convection Enclosure type Plastic Enclosure dimensions 0.47" H x 1.81" W x0.91" D 6.7" H with USB cable fully extended Mounting clip dimensions 0.59" H x 2.87" W x 1.71" D