Power Injector for XTP and Pro Series Control Systems

Product Description

Key FeaturesSupplies 13 watts of power to one XTP twisted pair extender, IPLPro control processor, or TouchLinkPro touchpanelDesigned specifically for the high data rates of XTPSystemsNo impact on signal qualityPatented ZipClip 200 mounting kit included: - Mounts securely on a variety of surfaces, including rack rails, tables, lecterns, projector poles, and table legs- Wire tie slots for proper strain relief and dressing of excess cable- Quick release tab allows for easy installation and removalReal-time status LEDs for troubleshooting and monitoringUL/c-UL listed and CE compliant General Connectors 1 RJ-45 female connector for pass-through input 1 RJ-45 female connector for power and pass-through output Power supply Internal input: 100-240 VAC, 50-60 Hz Power output +48 VDC, 0.35 A, 16.8 watts Ambient temperature/humidity Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing Cooling Convection, no vents Mounting Rack mount Yes, with optional 1U rack shelf with the included ZipClip200 mounting clip or by securing to rack rails with tie wraps Furniture mount Yes, with the included ZipClip 200 mounting clip Pole mount Yes, using tie wraps Enclosure type High impact, high temperature plastic Enclosure dimensions 1.7" H x 4.3" W x 4.5" D (1U high, quarter rack wide) (4.2 cm H x 11.0 cm W x 11.4 cm D) Product weight 0.8 lb (0.4 kg) Vibration Operating: 10-250 Hz, 0.25 Gp-p, 3 axes, 15 min. sweep Regulatory compliance Safety, EMI/EMC CE, C-tick, c-UL, UL, CISPR 22 ClassB, CISPR24, FCC Class B, NEC Class 2, KC, S-mark, GS-mark Environmental Complies with the appropriate requirements ofRoHS, WEEE. Product warranty 7 years parts and labor