16x16 to 320x320 Modular Fiber Optic Matrix Switcher
Product Details:
- Features High Quality
- Input AC/DC
- Power Source AC/DC
- Product Type electrical products
- Application Electrical & Electronics
- Size Standard
- Function Electrical & Electronics Equipment
- Click to View more
X
16x16 to 320x320 Modular Fiber Optic Matrix Switcher Product Specifications
- Standard
- as shown in the image
- High Quality
- 50 Hertz(Hz)
- AC/DC
- Electrical & Electronics
- AC/DC
- electrical products
- Electrical & Electronics Equipment
Product Description
Key FeaturesI/O sizes from 16x16 to 320x320Compatible with all Extron FOXSeries transmitters and receiversSpeedSwitchTechnology provides exceptional switching speed for HDCP-encrypted contentIntegrates easily into a wide range of 4K environmentsMultimode and singlemode I/O boards availableModular, field-upgradeable and hot-swappable design Optical specifications Number/type 16 singlemode or 16 multimode fiber optic inputs and outputs (16 Tx and 16 Rx) per I/O board NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication. Connectors 32 LC connectors per I/O board Operating distance Singlemode 30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode transmitter/receiver Multimode 300 m (985) with 62.5 m OM1 multimode (MM) cables with an Extron multimode Tx/Rx unit 1 km (3280) with 50 m OM2 multimode (MM) cables with an Extron multimode Tx/Rx unit 2 km (6561) with 50 m, OM3/OM4, 2000 MHz bandwidth, laser-optimized multimode (MM) cables with an Extron multimode Tx/Rx unit NOTE Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM) Transmission power Singlemode -5 dBm, typical Multimode -5 dBm, typical Maximum receiver sensitivity Singlemode -18 dBm, typical Multimode -12 dBm, typical Optical loss budget Singlemode 13 dB, maximum Multimode 7 dB, maximum Maximum channel data rate 4.25 Gbps Video Routing 16 x 16 up to 320 x 320 unidirectional (Tx) matrixor 8 x 8 up to 160 x 160 bidirectional (Tx/Rx) matrix Gain Unity Pixel data bit depth 8 bits per channel, 3 channels (R, G, B) Video/audio input or output Number/signal type 16 to 320 fiber optic signals Connectors 16 LC connectors per I/O board Re-clocking 2.125 Gbps, 4.25 Gbps, bypass, or automatic (SMP boards only) NOTE Input comes from an Extron fiber optic transmitter, fiber optic distribution amplifier, or fiber optic matrix switcher. NOTE Output connects to an Extron fiber optic receiver. Digital video SDI/HD-SDI/3G-SDI (FOX 320x Series with FOXI/OHD-SDI) Routing FOX I/O 1616 HD-SDI 16 x 16 up to 320 x 320 matrix Gain Unity Maximum data rate 2.97 Gbps Auto data rate lock Yes Data types 8 or 10 bit Operation standards SMPTE 292M, SMPTE 259M, SMPTE 297-2006, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120 Digital video input SDI/HD-SDI/3G-SDI (FOX 320x Series with FOXI/OHD-SDI) Number/signal type 16 single link SDI, HD-SDI, or 3G-SDI; or 8 dual link HD-SDI per board Connectors 16 female BNC per board Nominal level 0.80 Vp-p 10% Impedance 75 ohms Return loss >13 dB @ 1 MHz to 1.3 GHz Equalization Automatic Input cable equalization distance with FOX I/O 1616 HD-SDI boards 3G-SDI Extron RG6, Belden 1694A cable 410 (125 m) Extron R59, Belden 1505A cable 350 (107 m) HD-SDI Extron RG6, Belden 1694A cable 650 (198 m) Extron R59, Belden 1505A cable 550 (168 m) SDI Extron RG6, Belden 1694A cable 1230 (357 m) Extron R59, Belden 1505A cable 1100 (335 m) NOTE The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. Digital video output SDI/HD-SDI/3G-SDI (FOX 320x Series with FOX I/O HD-SDI) Number/signal type 16 single link SDI, HD-SDI, or 3G-SDI; or 8 dual link HD-SDI per board Connectors 16 female BNC per board Nominal level 0.80 Vp-p 10% Impedance 75 ohms Return loss >11 dB @ 1 MHz to 1.3 GHz DC offset 0 V with input at 0 offset Re-clocking Automatic, or use available bypass mode for nonstandard rates Jitter <0.2 UI Rise and fall time (20-80%) 600 ps 200 ps Control/remote switcher Serial control port 1 bidirectional RS-232 or RS-422, female 9-pin D connector (rear panel) 1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel ) Baud rate and protocol 9600 to 115200 baud, 9600 baud (default), 8 data bits, 1 stop bit, no parity Serial control pin configurations 9-pin female D connector RS-232: 2 = Tx, 3 = Rx, 5 = GND RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+ Mini stereo jack RS-232: tip = Tx, ring = Rx, sleeve = GND Ethernet control port 1 female RJ-45 connector Ethernet data rate 10/100Base-T, half/full duplex with autodetect Ethernet protocol ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, SNMP, Telnet Default settings Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off Web server Up to 200 simultaneous sessions 7 MB nonvolatile user memory Program control Extron control/configuration program for Windows Extron Simple Instruction Set (SIS) MicrosoftInternet Explorerver. 6 or higher, Telnet General Power supply Internal, 4* (positive-negative), primary and redundant, hot-swappable Input: 100-240 VAC, 50-60 Hz *Redundant power supplies are standard. Power consumption Enclosure without boards: 206 watts Enclosure fully loaded with 20 MM boards: 640 watts Enclosure fully loaded with 20 SM boards: 676 watts Enclosure fully loaded with 20 SDI/HD-SDI boards: 734 watts Each MM board: 21.7 watts Each SM board: 23.5 watts Each SDI/HD-SDI board: 26.2 watts Ambient temperature/humidity FOX I/O 1616 HD-SDI Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +104 F (0 to +40 C) / 10% to 90%, noncondensing All other boards and models Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, noncondensing Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, noncondensing Cooling Fans, right to left (as viewed from front panel) Thermal dissipation, full load 2505 BTU/hr Mounting Rack mount Yes Enclosure type Metal Enclosure dimensions 29.75" H x 17.0" W x 12.25" D (17U high, full rack wide) (75.6cm H x43.2 cm W x 31.1 cm D) (Depth excludes connectors and handles. Width excludes rack ears.) Product weight (fully loaded) 113 lbs (51.3 kg) Shipping weight 123 lbs (56 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Product warranty 3 years parts and laborFAQs of 16x16 to 320x320 Modular Fiber Optic Matrix Switcher:
Q: What is the power source for the 16x16 to 320x320 Modular Fiber Optic Matrix Switcher?
A: The switcher operates on both AC and DC power sources.Q: What is the frequency of the 16x16 to 320x320 Modular Fiber Optic Matrix Switcher?
A: It functions at a frequency of 50 Hertz (Hz).Q: What applications is this switcher suitable for?
A: It is designed for use in the electrical and electronics industry.Q: What is the size of the 16x16 to 320x320 Modular Fiber Optic Matrix Switcher?
A: The size of the switcher is standard.Q: What features make this product stand out?
A: The switcher is of high quality and ensures reliable performance.Other Products in 'Extron Electronics Products' category
Get in touch with us